Over time, drywall nails or screws can loosen, causing the drywall to shift and push the fastener outward. This creates a “nail pop”—a small bubble or blister. Though they look bothersome, nail pops are simple to fix with the right drywall repair techniques. Handybeeman shows you how to smooth them out and blend them with your wall.
Steps to Fix Nail Pops
1. Locate the Framing
Nail pops often cluster along a stud. Tap the drywall with your fingers—a hollow sound means no framing, while a solid thud pinpoints the stud. Find the frame behind the pops.
2. Secure the Drywall
Fasten the drywall to the stud with two drywall screws, placing one a few inches above and one below the nail pop for a firm hold.
3. Depress the Nail Pop
Gently use a hammer or nail punch to push the nail pop back into the drywall. Scrape away loose debris with a drywall knife.
4. Apply Mud
Spread drywall mud over the screws and damaged spot. Use two coats for a smooth, even cover, letting each layer dry.
5. Sand and Paint
Lightly sand the area until it matches the wall’s surface. Finish with primer and paint to restore a seamless look.
Why Choose Handybeeman?
Want a flawless fix without the hassle? Handybeeman offers professional drywall repair to tackle nail pops and more, letting you focus on the fun parts of your project. Contact Handybeeman today!
Frequently Asked Questions (FAQ)
What causes nail pops?
They happen when drywall shifts due to loose nails or screws, often from settling or temperature changes.
Can I just hammer the nail back in?
No, that won’t hold—use screws to resecure the drywall first.
How many coats of mud do I need?
Two coats usually suffice, but add a third if the surface isn’t smooth.
How long does it take to fix a nail pop?
About 1-2 hours, including drying time between mud coats.
Smooth Walls with Handybeeman
Let Handybeeman handle your nail pops with expert care. Contact Handybeeman today for a perfect finish!
No responses yet